# redis-cluster

A production-oriented Helm chart for a native, sharded Redis Cluster on
Kubernetes. It creates multiple independently writable shard primaries, one or
more readable failover replicas for every shard, strict cross-node placement,
persistent storage, optional external cluster-aware access, Prometheus metrics,
and an optional RedisInsight UI.

This chart deploys Redis Cluster mode. It does not deploy Sentinel, a proxy, or
an active-active database. Every hash slot has exactly one writable primary;
write capacity scales because different slot ranges belong to different
primaries.

**IMPORTANT NOTICE:** This has been made with an extra-supervised use of AI agents to perform the grunt work, with architectural choices strictly human-imposed. Has been successfully tested on a busy production environment, but in no case there is any guarantee nor I'm to be held liable of anything if you re-use this work.

## Contents

- [Architecture](#architecture)
- [Requirements](#requirements)
- [Quick start](#quick-start)
- [Connecting clients](#connecting-clients)
- [Authentication](#authentication)
- [Persistence](#persistence)
- [External access](#external-access)
- [RedisInsight](#redisinsight)
- [Metrics](#metrics)
- [Network policy and service mesh](#network-policy-and-service-mesh)
- [Scheduling and availability](#scheduling-and-availability)
- [Safe upgrades](#safe-upgrades)
- [Scaling and topology changes](#scaling-and-topology-changes)
- [Backup and restore](#backup-and-restore)
- [Argo CD](#argo-cd)
- [Configuration reference](#configuration-reference)
- [Troubleshooting](#troubleshooting)
- [Uninstalling](#uninstalling)

## Architecture

The default topology is three shards with one replica per shard:

```text
Kubernetes worker A       Kubernetes worker B       Kubernetes worker C
-------------------       -------------------       -------------------
shard 0 member 0          shard 1 member 0          shard 2 member 0
canonical primary         canonical primary         canonical primary

shard 2 member 1          shard 0 member 1          shard 1 member 1
replica                   replica                   replica
```

That produces six Redis instances:

```text
3 writable primaries + 3 readable/failover replicas = 6 Redis pods
```

Each persistent member is a separate one-replica StatefulSet with its own PVC.
This design allows Kubernetes to enforce all of the following:

- all canonical primaries occupy different `kubernetes.io/hostname` domains;
- the members of one shard never occupy the same node;
- each replica is crossed onto the node containing another shard's primary;
- member identities and Redis node IDs survive pod replacement.

At first boot, the shard-0 member-0 pod coordinates cluster creation. It waits
for every pristine member, introduces all nodes, divides all 16,384 hash slots
between the primaries, and attaches each replica to its intended primary. It
refuses to overwrite partially initialized cluster state.

Redis can promote a replica after a primary failure. A reconciliation loop later
returns the cluster to its canonical crossed layout after the failed node comes
back. Redis Cluster replication is asynchronous; a narrow failure or partition
window can still lose an acknowledged write.

## Requirements

- Kubernetes 1.25 or newer.
- Helm 3.
- At least `cluster.shards` schedulable worker nodes with distinct
  `kubernetes.io/hostname` labels. The default requires three workers.
- Enough CPU and memory on those workers for every Redis and exporter pod.
- A default StorageClass, or an explicit `persistence.storageClass`, when
  persistence is enabled.
- Working pod DNS and unrestricted Redis client and cluster-bus traffic between
  members.

Optional features have additional requirements:

- external access requires a controller that implements `type: LoadBalancer`
  Services and populates `.status.loadBalancer.ingress`;
- `metrics.serviceMonitor.enabled` requires the Prometheus Operator CRDs;
- RedisInsight Istio ingress requires the Istio networking CRDs;
- automatic RedisInsight certificate creation requires cert-manager.

## Quick start

Clone the repository and install an internal-only cluster:

```sh
git clone https://git.mulas.me/corrado/redis-cluster.git
cd redis-cluster

helm install redis . \
  --namespace redis \
  --create-namespace
```

Wait for all six default members:

```sh
kubectl get pods -n redis -w
```

Check cluster health and slot coverage:

```sh
kubectl exec -n redis redis-redis-cluster-s0-n0-0 -c redis -- \
  redis-cli cluster info

kubectl exec -n redis redis-redis-cluster-s0-n0-0 -c redis -- \
  redis-cli --cluster check 127.0.0.1:6379
```

`cluster_state:ok`, `cluster_slots_ok:16384`, and zero failed slots indicate a
healthy cluster.

### Recommended production values

Create a values file:

```yaml
auth:
  enabled: true
  existingSecret: redis-auth
  existingSecretKey: redis-password

persistence:
  storageClass: fast-storage
  size: 100Gi

redis:
  maxmemory: 80gb
  resources:
    requests:
      cpu: "1"
      memory: 84Gi
    limits:
      memory: 88Gi

metrics:
  serviceMonitor:
    enabled: true
    labels:
      release: kube-prometheus-stack

networkPolicy:
  enabled: true
  allowExternal: false
  extraIngress:
    - namespaceSelector:
        matchLabels:
          kubernetes.io/metadata.name: applications
```

Create the password Secret without committing the password:

```sh
kubectl create namespace redis
kubectl create secret generic redis-auth \
  --namespace redis \
  --from-literal=redis-password="$(openssl rand -base64 32)"
```

Install:

```sh
helm upgrade --install redis . \
  --namespace redis \
  --create-namespace \
  --values production-values.yaml
```

Keep `redis.maxmemory` below the container memory limit. Redis needs headroom
for replication buffers, client buffers, fork/copy-on-write activity, AOF
rewrites, allocator overhead, and the operating process.

## Connecting clients

Redis Cluster requires a cluster-aware client. A standalone or Sentinel client
will not correctly follow `MOVED` and `ASK` redirects.

The internal balanced bootstrap endpoint is:

```text
<release>-redis-cluster.<namespace>.svc:<redis.port>
```

For the example release:

```text
redis-redis-cluster.redis.svc:6379
```

The bootstrap Service only provides an initial node. The client downloads the
slot map and then connects directly to the member endpoints advertised by
Redis.

### redis-cli

```sh
kubectl run redis-cli --rm -it \
  --namespace redis \
  --image=redis:7.4-alpine \
  -- redis-cli -c -h redis-redis-cluster -p 6379
```

Add `-a "$REDIS_PASSWORD"` when authentication is enabled.

### Python

```python
from redis.cluster import RedisCluster

client = RedisCluster(
    host="redis-redis-cluster.redis.svc",
    port=6379,
    password="replace-me",
    decode_responses=True,
)

client.set("hello", "world")
print(client.get("hello"))
```

Set `read_from_replicas=True` only if stale replica reads are acceptable.

### Multi-key operations

Transactions, Lua scripts, and multi-key commands can only span keys in one hash
slot. Use a shared hash tag when keys must be colocated:

```text
cart:{customer-42}
cart-items:{customer-42}
```

## Authentication

Authentication is disabled by default so the chart can be evaluated without
secret bootstrapping. Enable it for production.

### Explicit password

```yaml
auth:
  enabled: true
  password: replace-me
```

This places the password in Helm release data and is not recommended for Git.

### Existing Secret

```yaml
auth:
  enabled: true
  existingSecret: redis-auth
  existingSecretKey: redis-password
```

The Secret must exist in the release namespace:

```yaml
apiVersion: v1
kind: Secret
metadata:
  name: redis-auth
  namespace: redis
type: Opaque
stringData:
  redis-password: CHANGE-ME
```

Use SOPS, Sealed Secrets, External Secrets, or another secret manager rather
than committing the cleartext example.

### Generated password

When `auth.enabled=true` and neither `password` nor `existingSecret` is set, the
chart generates a password. A normal Helm upgrade uses `lookup` to reuse the
existing Secret.

Retrieve it with:

```sh
kubectl get secret -n redis redis-redis-cluster \
  -o jsonpath='{.data.redis-password}' | base64 -d
echo
```

Argo CD renders charts without live-cluster access, so generated passwords need
the `ignoreDifferences` treatment shown in
[`argocd/application.yaml`](argocd/application.yaml), or preferably an
externally managed Secret.

The chart configures Redis `requirepass` and `masterauth`. It does not currently
manage Redis ACL users or Redis TLS.

## Persistence

Persistence is enabled by default. Every Redis member receives an independent
PVC and writes an append-only file using `appendfsync everysec`.

```yaml
persistence:
  enabled: true
  storageClass: ""
  accessModes:
    - ReadWriteOnce
  size: 3Gi
```

An empty `storageClass` uses the cluster default. Any valid Kubernetes storage
quantity is accepted, including `500Mi`, `100Gi`, and `2Ti`. The chart imposes
no upper size limit. Actual capacity is controlled by the StorageClass,
provisioner, namespace quotas, and infrastructure.

`persistence.size` is per member, not total capacity. With three shards and one
replica, `100Gi` requests six 100 Gi volumes.

When persistence is disabled, Redis uses `emptyDir` and all data on a member is
lost when its pod is rescheduled.

### Expanding existing volumes

Increasing the value for a new installation is straightforward. Existing
StatefulSet `volumeClaimTemplates` are immutable, so changing
`persistence.size` alone may be rejected and does not reliably resize existing
claims.

To expand an existing deployment:

1. Confirm the StorageClass has `allowVolumeExpansion: true`.
2. Back up the cluster.
3. Patch each existing PVC to the new requested size.
4. Wait for the storage controller and filesystem resize to complete.
5. Keep `persistence.size` at the new value for future members.

Never shrink Redis PVCs in place.

## External access

External access is disabled by default because Redis Cluster cannot be exposed
correctly through a single generic TCP LoadBalancer.

When enabled, the chart creates:

- one balanced bootstrap LoadBalancer Service; and
- one LoadBalancer Service for every Redis member.

The default 3x1 topology therefore creates seven LoadBalancers. This can incur
cloud-provider cost and consume seven addresses.

```yaml
externalAccess:
  enabled: true
  port: 6379
  loadBalancerClass: ""
  externalTrafficPolicy: Cluster
  loadBalancerSourceRanges:
    - 203.0.113.0/24
```

The chart does not assume MetalLB or a particular cloud provider. It waits for
each member Service to publish either an IP or hostname under
`.status.loadBalancer.ingress`, then makes that member advertise the discovered
endpoint. All Services use the same Redis port; there is no fixed IP list and
no port fan-out.

Get the bootstrap endpoint:

```sh
kubectl get service -n redis redis-redis-cluster-external \
  -o jsonpath='{range .status.loadBalancer.ingress[*]}{.ip}{.hostname}{"\n"}{end}'
```

External clients need only that bootstrap endpoint in their startup
configuration, but they must be able to route to every per-member address
returned in the slot map. A client that can reach the bootstrap address but not
the member addresses will connect initially and then fail on redirected keys.

Keep the LoadBalancer Services instead of deleting and recreating them. If the
controller assigns a new member address, restart that member's one-pod
StatefulSet so its discovery init container records and advertises the new
endpoint.

External Redis traffic is unencrypted. Restrict
`loadBalancerSourceRanges`, use upstream firewalls/private routing, enable
authentication, or provide network-layer encryption. Do not expose an
unauthenticated cluster to the public Internet.

### Provider annotations

Bootstrap and member annotations are separate:

```yaml
externalAccess:
  bootstrap:
    annotations:
      service.beta.kubernetes.io/example: bootstrap-value
  memberServices:
    annotations:
      service.beta.kubernetes.io/example: member-value
```

Use these for provider-specific address pools, internal LoadBalancers, health
checks, or DNS controllers.

## RedisInsight

RedisInsight is optional and disabled by default:

```yaml
redisInsight:
  enabled: true
```

It creates one Deployment, one ClusterIP Service, and optionally a dedicated
PVC. RedisInsight stores its SQLite state, saved connections, and logs under
`/data`.

### Automatic cluster connection

No IP address is required. With `redisInsight.connection.host=""`, the chart
preconfigures RedisInsight from the release-aware balanced bootstrap endpoint:

- with external access disabled, it uses the internal
  `<release>-redis-cluster` Service DNS;
- with external access enabled, an init container reads the published IP or
  hostname from the `<release>-redis-cluster-external` LoadBalancer Service and
  injects that address before RedisInsight starts.

Kubernetes and the LoadBalancer controller therefore own the VIP lifecycle.
RedisInsight follows the correct release and namespace without a hard-coded
address. Port `0` automatically follows `redis.port` or
`externalAccess.port`.

```yaml
redisInsight:
  enabled: true
  connection:
    host: ""
    port: 0
    alias: redis-cluster
    tls: false
```

Set `host` and `port` when RedisInsight should inspect another cluster, or when
pods cannot hairpin through the external LoadBalancer endpoint. When chart
authentication is enabled, RedisInsight reads the same password Secret
automatically.

Port-forward the UI:

```sh
kubectl port-forward -n redis \
  service/redis-redis-cluster-insight 5540:80
```

Open <http://127.0.0.1:5540>.

### Istio HTTP ingress

The chart can create an Istio Gateway and VirtualService for RedisInsight:

```yaml
redisInsight:
  enabled: true
  ingress:
    enabled: true
    host: redisinsight.example.com
    gatewaySelector:
      istio: ingressgateway
    requestTimeout: 60s
    tls:
      enabled: false
```

The host is required when ingress is enabled. Hosting RedisInsight under a
rewritten path prefix is not supported; give it a host and route `/`.

### Istio TLS with an existing Secret

```yaml
redisInsight:
  ingress:
    enabled: true
    host: redisinsight.example.com
    tls:
      enabled: true
      credentialName: redisinsight-tls
      certificate:
        create: false
```

The credential Secret must be available to the selected Istio ingress gateway.
Exact Secret placement depends on the Istio installation.

### Istio TLS with cert-manager

```yaml
redisInsight:
  ingress:
    enabled: true
    host: redisinsight.example.com
    tls:
      enabled: true
      credentialName: redisinsight-tls
      certificate:
        create: true
        issuerName: letsencrypt-production
        issuerKind: ClusterIssuer
        secretNamespace: istio-system
```

Set `secretNamespace` to the namespace from which the ingress gateway reads
credential Secrets. An empty value uses the Helm release namespace.

RedisInsight is an administrative interface and does not provide ingress
authentication. Put an identity-aware proxy or Istio authorization policy in
front of it and restrict network exposure.

## Metrics

The Redis exporter sidecar is enabled by default on every member:

```yaml
metrics:
  enabled: true
  port: 9121
```

Enable a ServiceMonitor when the Prometheus Operator CRDs are installed:

```yaml
metrics:
  serviceMonitor:
    enabled: true
    interval: 30s
    scrapeTimeout: 10s
    labels:
      release: kube-prometheus-stack
```

Use labels selected by your Prometheus installation.

## Network policy and service mesh

### NetworkPolicy

NetworkPolicy creation is disabled by default because policy enforcement and
default-deny behavior vary between CNIs.

```yaml
networkPolicy:
  enabled: true
  allowExternal: false
  extraIngress:
    - namespaceSelector:
        matchLabels:
          kubernetes.io/metadata.name: applications
  metricsFromNamespaces:
    - monitoring
```

The generated policy always allows Redis client, replication, migration, and
cluster-bus traffic between release pods. `allowExternal` refers to Redis client
ingress from outside the selected pods; it does not create a LoadBalancer.

### Istio sidecars

Redis pods disable Istio injection by default:

```yaml
istio:
  injectSidecar: false
```

Redis Cluster uses direct node-to-node client and cluster-bus connections.
Namespace-wide strict mTLS can break this traffic. Either keep the Redis
workload outside strict mesh enforcement, create a scoped PERMISSIVE
PeerAuthentication, or deliberately enable and validate sidecars before
production use.

## Scheduling and availability

The chart uses required pod affinity and anti-affinity, not preferences. It will
leave pods Pending rather than silently place a primary beside its own replica.

For the default topology:

- three workers are required;
- losing one worker removes one primary and a replica of another shard;
- the lost primary's replica is on a surviving worker;
- two surviving primaries form the majority needed to authorize promotion.

Inspect placement:

```sh
kubectl get pods -n redis \
  -L redis-cluster.shard,redis-cluster.member \
  -o wide
```

The two members of each shard must have different `NODE` values. All member-0
pods must also occupy different nodes.

The global PodDisruptionBudget defaults to `maxUnavailable: 1`. It limits
cooperating voluntary disruptions but cannot prevent node crashes or an
administrator from deleting multiple pods.

### Failure behavior

- Failure detection begins after approximately
  `cluster.nodeTimeoutMilliseconds`.
- A healthy cross-node replica can be elected primary.
- Cluster-aware clients refresh the slot map and reconnect.
- Losing both members of one shard loses that slot range.
- With `cluster.requireFullCoverage=true`, loss of any slot range makes the
  cluster unavailable until coverage returns.
- Automatic failover requires a majority of current primaries to communicate.

## Safe upgrades

Every member StatefulSet uses `updateStrategy: OnDelete`. A Helm or Argo update
changes the pod template but deliberately does not restart all independent
members at once.

Restart exactly one member at a time:

1. Inspect `CLUSTER NODES` and choose a current replica first.
2. Delete that one pod.
3. Wait for the replacement to become Ready.
4. Confirm `cluster_state:ok`.
5. Continue with the next replica, then primaries one by one.

Example:

```sh
kubectl exec -n redis redis-redis-cluster-s0-n0-0 -c redis -- \
  redis-cli cluster nodes

kubectl delete pod -n redis redis-redis-cluster-s0-n1-0

kubectl wait -n redis \
  --for=condition=Ready \
  pod/redis-redis-cluster-s0-n1-0 \
  --timeout=300s

kubectl exec -n redis redis-redis-cluster-s0-n0-0 -c redis -- \
  redis-cli cluster info
```

The preStop hook asks a healthy replica to take over before an intentional
primary restart. Never delete both members of one shard together.

## Scaling and topology changes

`cluster.shards` and `cluster.replicasPerShard` define the first-boot topology.
Changing them in Helm on a populated cluster does not reshard existing data and
is not a supported scaling procedure.

Adding a shard requires an explicit operational workflow:

1. create and persist the new members;
2. join them with `CLUSTER MEET`;
3. assign replicas;
4. move slots with `redis-cli --cluster reshard`;
5. verify slot coverage and failure placement.

Removing a shard requires moving all of its slots away before removing its
nodes. Adding replicas requires joining the nodes and issuing
`CLUSTER REPLICATE`. Back up first.

The chart enforces at least three shards, at least one replica per shard, and
fewer replicas per shard than shards so the crossed placement remains valid.

## Backup and restore

This chart does not schedule backups. Redis Cluster stores different slot ranges
on different primaries, so a backup strategy must cover every shard.

Common approaches include:

- crash-consistent snapshots of all member volumes;
- coordinated AOF/RDB copies from one healthy member of every shard;
- a Redis-aware backup product that understands cluster topology.

Test restore procedures. Restoring only one shard or one arbitrary member does
not reconstruct the complete keyspace. Keep backups outside the cluster and
verify both data and all 16,384 slots after recovery.

## Argo CD

[`argocd/application.yaml`](argocd/application.yaml) is a portable example using
the public repository. Apply it once:

```sh
kubectl apply -f argocd/application.yaml
```

The file is outside `templates/`, so it is not part of the Helm release. If you
edit its inline `valuesObject`, a normal sync of the Redis Application cannot
update the Application's own spec. Reapply the file, manage it from an
app-of-apps, or use an ApplicationSet:

```sh
kubectl apply -f argocd/application.yaml
```

For authentication, prefer an externally managed Secret. If the chart generates
the password, retain `RespectIgnoreDifferences=true` and the Secret
`ignoreDifferences` rule from the example.

Argo applies new StatefulSet templates, but `OnDelete` intentionally prevents
automatic Redis pod rolls. Perform the one-member-at-a-time procedure after
reviewing each change. Additional authentication, external access, and Istio
examples are in [`argocd/README.md`](argocd/README.md).

## Configuration reference

The authoritative defaults are in [`values.yaml`](values.yaml), and
[`values.schema.json`](values.schema.json) validates supported values.

### Release and image

| Value | Default | Description |
| --- | --- | --- |
| `nameOverride` | `""` | Override the chart name portion of resource names. |
| `fullnameOverride` | `""` | Override the complete release resource prefix; maximum 53 characters. |
| `image.repository` | `redis` | Redis image repository. |
| `image.tag` | `7.4-alpine` | Redis image tag. |
| `image.pullPolicy` | `IfNotPresent` | Redis image pull policy. |
| `imagePullSecrets` | `[]` | Pod image pull Secret references. |

### Cluster

| Value | Default | Description |
| --- | --- | --- |
| `cluster.shards` | `3` | Independently writable primaries and slot ranges. |
| `cluster.replicasPerShard` | `1` | Readable failover replicas per shard. |
| `cluster.busPort` | `16379` | Redis node-to-node cluster bus port. |
| `cluster.nodeTimeoutMilliseconds` | `10000` | Failure-detection timeout. |
| `cluster.requireFullCoverage` | `true` | Stop serving when any slot is unavailable. |
| `cluster.allowReadsWhenDown` | `false` | Permit reads while cluster state is down. |
| `cluster.migrationBarrier` | `1` | Minimum healthy replicas retained during replica migration. |

### Redis and authentication

| Value | Default | Description |
| --- | --- | --- |
| `auth.enabled` | `false` | Enable password authentication. |
| `auth.password` | `""` | Explicit password; generated when empty and no Secret is supplied. |
| `auth.existingSecret` | `""` | Existing password Secret name. |
| `auth.existingSecretKey` | `redis-password` | Password key in the existing Secret. |
| `redis.port` | `6379` | Redis client port. |
| `redis.maxmemory` | `384mb` | Redis memory ceiling. Empty disables the explicit ceiling. |
| `redis.maxmemoryPolicy` | `noeviction` | Redis eviction policy. |
| `redis.extraConfig` | `""` | Additional lines appended to `redis.conf`. |
| `redis.resources` | see values | Redis container requests and limits. |

Do not use `redis.extraConfig` to override cluster identity, announce endpoints,
data directory, authentication, or other settings managed by the chart.

### Probes

| Value | Default | Description |
| --- | --- | --- |
| `probes.redis.startup.initialDelaySeconds` | `10` | Delay before startup checks. |
| `probes.redis.startup.periodSeconds` | `5` | Startup check interval. |
| `probes.redis.startup.timeoutSeconds` | `4` | Startup check timeout. |
| `probes.redis.startup.failureThreshold` | `180` | Failures allowed before restart. |
| `probes.redis.liveness.periodSeconds` | `15` | Liveness check interval. |
| `probes.redis.liveness.timeoutSeconds` | `8` | Liveness check timeout. |
| `probes.redis.liveness.failureThreshold` | `10` | Liveness failures before restart. |
| `probes.redis.readiness.periodSeconds` | `5` | Readiness check interval. |
| `probes.redis.readiness.timeoutSeconds` | `4` | Readiness check timeout. |
| `probes.redis.readiness.failureThreshold` | `3` | Readiness failures before removal from Services. |

### Persistence

| Value | Default | Description |
| --- | --- | --- |
| `persistence.enabled` | `true` | Create one PVC per Redis member. |
| `persistence.storageClass` | `""` | StorageClass; empty uses the cluster default. |
| `persistence.accessModes` | `[ReadWriteOnce]` | PVC access modes. |
| `persistence.size` | `3Gi` | Capacity per member; no chart-side maximum. |
| `persistence.annotations` | `{}` | PVC template annotations. |

### External access

| Value | Default | Description |
| --- | --- | --- |
| `externalAccess.enabled` | `false` | Create bootstrap and per-member LoadBalancers. |
| `externalAccess.port` | `6379` | External Redis port on every Service. |
| `externalAccess.bootstrap.annotations` | `{}` | Bootstrap Service annotations. |
| `externalAccess.memberServices.annotations` | `{}` | Per-member Service annotations. |
| `externalAccess.loadBalancerClass` | `""` | Optional LoadBalancer implementation class. |
| `externalAccess.externalTrafficPolicy` | `Cluster` | Kubernetes external traffic policy. |
| `externalAccess.loadBalancerSourceRanges` | `[]` | Allowed client CIDRs. |
| `externalAccess.allocateLoadBalancerNodePorts` | `true` | Allocate backing NodePorts. |
| `externalAccess.endpointDiscovery.*` | see values | Image/resources for endpoint discovery. |

### RedisInsight

| Value | Default | Description |
| --- | --- | --- |
| `redisInsight.enabled` | `false` | Deploy RedisInsight. |
| `redisInsight.image.repository` | `redis/redisinsight` | RedisInsight image repository. |
| `redisInsight.image.tag` | `3.8.0` | RedisInsight image tag. |
| `redisInsight.image.pullPolicy` | `IfNotPresent` | RedisInsight image pull policy. |
| `redisInsight.port` | `5540` | RedisInsight container port. |
| `redisInsight.connection.host` | `""` | Empty discovers the balanced release bootstrap endpoint. |
| `redisInsight.connection.port` | `0` | Zero follows the selected Redis Service port. |
| `redisInsight.connection.alias` | `redis-cluster` | Display name in RedisInsight. |
| `redisInsight.connection.tls` | `false` | Enable TLS for the Redis connection. |
| `redisInsight.persistence.enabled` | `true` | Persist RedisInsight state. |
| `redisInsight.persistence.storageClass` | `""` | StorageClass; empty uses default. |
| `redisInsight.persistence.accessModes` | `[ReadWriteOnce]` | RedisInsight PVC access modes. |
| `redisInsight.persistence.size` | `1Gi` | RedisInsight PVC size; no chart-side maximum. |
| `redisInsight.persistence.annotations` | `{}` | RedisInsight PVC annotations. |
| `redisInsight.resources` | see values | RedisInsight requests and limits. |
| `redisInsight.podAnnotations` | `{}` | RedisInsight pod annotations. |
| `redisInsight.nodeSelector` | `{}` | RedisInsight node selector. |
| `redisInsight.tolerations` | `[]` | RedisInsight pod tolerations. |
| `redisInsight.ingress.enabled` | `false` | Create Istio Gateway and VirtualService. |
| `redisInsight.ingress.host` | `""` | Required hostname when ingress is enabled. |
| `redisInsight.ingress.gatewaySelector` | `{istio: ingressgateway}` | Select the Istio gateway workload. |
| `redisInsight.ingress.requestTimeout` | `60s` | Istio route timeout. |
| `redisInsight.ingress.tls.enabled` | `false` | Serve HTTPS on the Gateway. |
| `redisInsight.ingress.tls.credentialName` | `""` | Istio TLS credential Secret. |
| `redisInsight.ingress.tls.certificate.create` | `false` | Create the Secret using cert-manager. |
| `redisInsight.ingress.tls.certificate.*` | see values | Issuer and Secret namespace settings. |

### Metrics, policy, and pod settings

| Value | Default | Description |
| --- | --- | --- |
| `metrics.enabled` | `true` | Add redis_exporter to every member pod. |
| `metrics.image.repository` | `ghcr.io/oliver006/redis_exporter` | Exporter image repository. |
| `metrics.image.tag` | `v1.87.0-alpine` | Exporter image tag. |
| `metrics.image.pullPolicy` | `IfNotPresent` | Exporter pull policy. |
| `metrics.port` | `9121` | Exporter port. |
| `metrics.resources` | see values | Exporter requests and limits. |
| `metrics.serviceMonitor.enabled` | `false` | Create a Prometheus Operator ServiceMonitor. |
| `metrics.serviceMonitor.interval` | `30s` | Prometheus scrape interval. |
| `metrics.serviceMonitor.scrapeTimeout` | `10s` | Prometheus scrape timeout. |
| `metrics.serviceMonitor.labels` | `{}` | Labels used by Prometheus to select the ServiceMonitor. |
| `networkPolicy.enabled` | `false` | Create an ingress NetworkPolicy. |
| `networkPolicy.allowExternal` | `true` | Allow Redis client ingress from all sources. |
| `networkPolicy.extraIngress` | `[]` | Allowed peers when unrestricted ingress is disabled. |
| `networkPolicy.metricsFromNamespaces` | `[]` | Namespaces allowed to scrape metrics. |
| `podDisruptionBudget.enabled` | `true` | Create a global Redis PDB. |
| `podDisruptionBudget.maxUnavailable` | `1` | Maximum voluntary unavailable Redis pods. |
| `serviceAccount.create` | `true` | Create the endpoint-discovery ServiceAccount. |
| `serviceAccount.name` | `""` | Existing or generated ServiceAccount name. |
| `serviceAccount.annotations` | `{}` | ServiceAccount annotations. |
| `nodeSelector` | `{}` | Redis pod node selector. |
| `tolerations` | `[]` | Redis pod tolerations. |
| `topologySpreadConstraints` | `[]` | Additional spread constraints. |
| `priorityClassName` | `""` | Redis pod priority class. |
| `podAnnotations` / `podLabels` | `{}` | Additional Redis pod metadata. |
| `podSecurityContext` | see values | Redis pod-level security context. |
| `containerSecurityContext` | see values | Redis/exporter container security context. |
| `istio.injectSidecar` | `false` | Enable sidecars on Redis member pods. |
| `terminationGracePeriodSeconds` | `30` | Pod shutdown grace period. |

## Troubleshooting

### Pods remain Pending

Inspect scheduling events:

```sh
kubectl describe pod -n redis <pending-pod>
```

Common causes are:

- fewer schedulable workers than `cluster.shards`;
- insufficient CPU or memory;
- node taints without matching tolerations;
- node selectors excluding required workers;
- existing pods violating the required crossed affinity layout;
- unbound PVCs or a missing default StorageClass.

The scheduler message `didn't match pod affinity/anti-affinity rules` means the
availability invariant cannot currently be satisfied. Do not weaken it unless
you accept a primary and its replica sharing a failure domain.

### External-access pods wait in init

```sh
kubectl logs -n redis <pod> -c discover-external-endpoint
kubectl get services -n redis
```

The LoadBalancer controller must populate an IP or hostname for every member
Service. Check controller events, address-pool capacity, provider annotations,
quota, and `loadBalancerClass`.

### `cluster_state:fail`

```sh
kubectl exec -n redis redis-redis-cluster-s0-n0-0 -c redis -- \
  redis-cli cluster nodes

kubectl exec -n redis redis-redis-cluster-s0-n0-0 -c redis -- \
  redis-cli cluster info
```

Check for missing members, failed slot ranges, DNS failures, blocked port 16379,
or a member that cannot read its PVC. Readiness intentionally remains false
until the complete cluster is healthy; liveness does not restart Redis merely
for `CLUSTERDOWN`.

### Authentication errors

Confirm the client is using the current Secret and that all pods reference the
same password:

```sh
kubectl get secret -n redis redis-redis-cluster \
  -o jsonpath='{.data.redis-password}' | base64 -d
echo
```

When using an existing Secret, verify its name/key match the Helm values. Restart
members one at a time if a password Secret was deliberately changed.

### External client connects, then fails

This almost always means the bootstrap address is reachable but the member
addresses in `CLUSTER SLOTS`/`CLUSTER SHARDS` are not. Route and permit every
per-member LoadBalancer endpoint.

### RedisInsight is not rendered by Argo CD

Confirm the live Application contains `redisInsight.enabled: true`:

```sh
kubectl get application -n argocd redis-cluster -o yaml
```

Changing `argocd/application.yaml` in this repository does not update the live
Application during its own Helm sync because the file is outside `templates/`.
Reapply it or manage it from an app-of-apps.

### Inspect rendered manifests

```sh
helm lint .
helm template redis . --namespace redis --debug
```

## Uninstalling

Back up first, then remove the release:

```sh
helm uninstall redis --namespace redis
```

PVCs created from StatefulSet volume claim templates are normally retained when
the StatefulSets are deleted. Verify them before deleting anything:

```sh
kubectl get pvc -n redis
```

The directly managed RedisInsight PVC may be removed with the Helm release,
depending on Helm and storage-policy behavior. Preserve or snapshot it if its UI
state matters.

Delete retained Redis data PVCs only when data destruction is intentional.

## License

This project is distributed under the BSD 3-Clause License. See
[`LICENSE`](LICENSE).